fbpx

FS 400

The FS 400 has been developed as a combination of advanced technological and technical solutions with the highest quality materials. This machine is characterised by high efficiency, reliability, ease of use and operation.

The FS 400 is a shearer loader designed for working with all types of conveyors of 850 to 1200 mm wide and with the Eicotrack (125 or 126 mm) Megatrack® (147 mm) or Gigatrack (151 mm) haulage systems.

Its modular design allows to obtain various shearer heights without changing the hauling (carriage) bodies. It is provided with the control system with full diagnostics and with integrated radio remote control system, thus allowing for full monitoring of the machine operation on a mine surface, according to the Industry 4.0 standard.

The FS 400 can be provided in the along with additional equipment enabling operation in an automatic or remote cycle. The shearer is adapted to work in underground mines of class “a”, “b”, “c” methane explosion hazard and class “A” and “B” coal dust explosion hazard.

  • modern solutions for machine operation safety
  • advanced self-diagnostics of shearer subassemblies
  • easy adaptation of the shearer to work with various types of face conveyors (width from 850 to 1100 mm)
  • modular design enabling obtaining various cutting heights and adapting the machine to various types of haulage system
  • large area of shearer ground clearance
  • maximum transport dimensions reduced to 3 m
  • comfort of mechanical maintenance service (all main units accessible from the gob side)
  • two independent hydraulic systems with functional distribution to the left and right side
  • automatic lubrication system of the shearer key components (nodes)
  • the ability to work in the mode of mutual availability of hydraulic systems
  • possibility to install the loader
  • possibility to install a universal lump breaker (crusher)
  • modular design of electrical equipment
  • comfort of electrical maintenance service (all main units accessible from the gob side)
  • converter power-electronic system ensuring return of energy to the power network
  • the ability of the haulage system to work in a single-motor mode
  • application of flameproof connectors for power and signal circuits
  • control system in the Industry 4.0 standard
  • large, easy-to-read LCD display
  • shearer data transmission in the Ethernet standard
  • data readout and the shearer parametrization in the Wi-Fi standard
  • continuous monitoring and display of basic shearer operational parameters on remote controls and local system panels
  • in-wall shearer positioning system
  • Memory Cut system
  • vision system
  • methane concentration measurement system
  • working platforms
  • remote control system from the longwall centre or maingate
maximum cutting height [mm] 4 600 – 5 200
horizontal centre-to-centre distance between cutting drums [mm] 12 765 – 13 278
distance between driving wheel axes/centres [mm] 5 100 – 5 650
machine body height [mm] 1 160 – 1 700
undercut [mm] min. 200

Additional parameters

supply voltage [V] 1 000, 1 140 3 300
total installed power [kW] 965 1 525
cutting drum motor power [kW] 200 – 350 300 – 630
cutting drum diameters [mm] 1 400 – 2 500 1 400 – 2 500
web [mm] 750 – 1 000 750 – 1 000
arms type FRA-400S
FRA-400L
FRA-400S
FRA-400L
power of the electric haulage drive motor [kW] 75 75
power of the electric motor of the hydraulic pump unit [kW] 15 15
power of the breaker (crusher)’s electric motor [kW] 85 85
allowable longitudinal inclination gradient [°] ± 35 ± 35
allowable transverse inclination gradient upwards [°] 20 20
allowable transverse inclination gradient downwards [°] 15 15
pulling force [kN] 2×355 2×355
haulage speed [m/min] 0 – 27,3 0 – 27,3
maximum weight [t] 68 72
Globe icon EN Globe icon