KGS-245N
The KGS-245N is a longwall shearer with hydraulic drive. Due to the increased interest, a modernization of the structure has been implemented in terms of its modernisation, improvement of technical parameters and operational health and safety. This machine is characterised by high efficiency, reliability, ease of use and operation.
The shearer’s design has been adapted to work with various types of longwall armoured conveyors with width of 750 to 850mm, equipped with Eicotrack (125 or 126 mm).
The shearer has been designed in the Industry 4.0 standard, therefore it is provided with the functions of advanced diagnostics of parameters and full monitoring of the machine operation on a mine surface. The KGS-245N can be provided in the along with additional equipment. The shearer is adapted to work in underground mines of class “a”, “b”, “c” methane explosion hazard and class “A” and “B” coal dust explosion hazard.
- modern solutions for machine operation safety
- advanced self-diagnostics of shearer subassemblies
- design enabling obtaining various cutting heights
- modular design of electrical equipment
- haulage system implemented by modern low-loss hydraulic drives
- easy-to-read LCD display
- possibility of the shearer data transmission
- data readout and the shearer parametrization in the Wi-Fi standard
- continuous monitoring and display of basic shearer operational parameters on remote controls
- in-wall shearer positioning system
- methane concentration measurement system
- remote control system from the longwall centre or maingate
maximum cutting height [mm] | 2800 |
horizontal centre-to-centre distance between cutting drums [mm] | 9390 |
distance between driving wheel axes/centres [mm] | 4654-5288 |
machine body height [mm] | 795-1190 |
undercut [mm] | 120-250 |
Additional parameters
supply voltage [V] | 1000, 1140 |
total installed power [kW] | 475 |
cutting drum motor power[kW] | 200 |
cutting drum diameters [mm] | 900-1500 |
web [mm] | 700-800 |
arms type | R200 |
power of the electric haulage drive motor [kW] | 75 |
allowable longitudinal inclination gradient [°] | 35 |
allowable transverse inclination gradient [°] | ±15 |
pulling force [kN] | 2x290 |
haulage speed [m/min] | 8,9 |
maximum weight [t] | 28 |