TR-2000

FAMUR is a leading manufacturer of roadheaders, continuing the tradition of the REMAG brand. Roadheaders are widely used in coal mining, but also in aggregate mines, quarries, as well as in the cutting of old concrete foundations and in the mining of waste rock on post-mining heaps.

The TR-2000 is a roadheader is intended to drill roadheadings of with a cross-section of up to 46 m² in rocks with a compressive strength of up to 60 MPa. The machine can be used underground in coal mines in methane and non-methane fields with „a”, „b” and „c” class of methane explosion hazard as well as “A” and “B” class of coal dust explosion hazard provided that it is to be de-energized at maximum methane concentration increase up to 2%. The roadheader is marked with the CE mark.

Roadheader is designed and intended mainly for operation in horizontal or inclined underground mine headings with the following inclinations:

  • lengthwise/ longitudinal inclination (along strikes and dips) max  ± 15°
  • crosswise/ transverse inclination max 5°

The progress/advancing of the gallery/heading drivage depends on:

  • rock hardness
  • rock type to be cut
  • type of rock in the floor and roof
  • firmness and bedding of the rock
  • lengthwise and crosswise gallery inclination gradient
  • kind of gallery support and kind of lining
  • shape of the heading/gallery
  • output material haulage type
  • type of material to be hauled
  • rock strength parameters
  • hydraulic system equipped with the LOAD SENSING system ensuring:
    – lower consumption of electricity
    – lower hydraulic oil operating temperature
    – longer life and durability of hydraulic system components
    • roadheader’s hydraulic system adapted to supply external hydraulically driven receivers with a standard pressure of 12 MPa or 14 MPa, with the possibility of pressure regulation up to 22 MPa
    • surfaces exposed to wear covered with materials with high abrasion resistance
    • visualization system of the cutting process
    • system for monitoring roadheader status and cutting processes and recording them on the recorder
    • remote control system
    • ergonomic control system of the desktop and easy maneuvering
    • Autocut – automatic cutting system with progress monitoring
rock compressive strength [MPa] 60
maximum cutting cross-section of one machine position [m²] 46
maximum cutting height [mm] 6100
maximum cutting width [mm] 8000
max installed power [kW] 485
supply voltage [V] 1000
weight [t] 70
Globe icon EN Globe icon