The EZ-K10 bolting and drilling rig is a self-propelled machine, intended to make anchoring holes and install anchors (bolts) for arch supports for the mining industry. The device is provided with electrohydraulic drive. The bolter is equipped with a drilling tower and a rotary drill with water scrubbing system, optionally with air purging or suction function.

The operator workplace enables complete control during installation of bolts/anchors.

Electrical equipment compliant with the requirements of the EU directives is an explosion-proof design and can be used in the underground excavations with methane explosion hazard.

  • small dimensions
  • option to cooperate with roadheader
  • option to move crosswise the excavation
  • option to use string bolts
  • LOAD-SENSING system
  • oil cooling during standstill
  • LED lighting
  • possibility to control the machine from the operator workplace situated on the right or on the left side
Maximum machine length 5500 mm
Maximum machine width 1150 mm
Maximum machine height 1800 mm
Maximum drill torque 500 Nm
Maximum drill revolutions 600 rpm
Maximum loader weight 12000 kg
Unit ground pressure 0.1 MPa
Electric motor power 45 kW
Power supply/frequency 500 or 1000/50 V/Hz
Power supply/frequency 650 or 1140/50 V/Hz


Technical parameters are specified individually for the needs of the customer and may exceed values given in the table.